格林帕克FAQ

格林帕克FAQ

92.
我为什么要考虑GreenPak的下一个设计?

GreenPak的主要优点是:

1.灵活性:因为GreenPak在几分钟内编程,您的设计可以快速轻松地改变以适应新的要求和正确的系统错误。过去的变化需要在桌面上几分钟内需要在几分钟内进行板旋转。

2.低功耗:GreenPak设计通常在待机状态下在几个微安运行,并且通常在活动模式下使用小于100毫安的平均值。每个GreenPak设备的架构都经过优化,可为您提供最大控制功耗。

3.小尺寸:常见的是GreenPak所取代的电路比Greenpak更大的董事会面积为5 - 10倍。

93.
我应该如何选择最适合我的设计的部分?

GreenPak部分的选择取决于需要多少I / O,功能块(ACMP,ADC,DCMP / PWM),准确性和价格。

94.
我必须在生产中编程GreenPak吗?

Dialog supports production programming of GreenPAK devices in quantities down to the order minimum quantity, which is 3K pieces (equal to the quantity on one reel).

95.
对话是什么需要我在GreenPak上进入生产?

您需要提供您已批准生产的代码文件。

96.
如果对话框有助于我为GreenPak进行设计,获得第一个版本需要多长时间?

它通常非常快。它可以短至24小时,至长达2周。

97.
GreenPak的最大数据速率是多少?

最大数据速率取决于信号将通过的内部块。最快的速率是通过无内部块的连接(输入引脚 - >输出引脚)。下一个最快的输入引脚 - > LUT - >输出引脚。

98.
我可以在输入引脚上施加高于VDD的电压吗?

Yes, but not more than VDD + 0.3 V. Every IO pin is clamped by an ESD diode to VDD.

99.
模拟引脚看到的输入阻抗是什么?

它取决于所使用的模拟块及其配置(缓冲区,低带宽,增益等)。ACMP输入处于GoHMS的范围,用于增益光谱1x。但是,允许至少0.1 UA。由于ESD保护结构泄漏。

100
如何定义静态电流,它如何如此低?

The quiescent current is defined as the current for the design when all inputs and outputs are static, and oscillator and analog blocks are in operational mode if enabled in the design. Very low current consumption is made possible by GreenPAK's capability to dynamically turn on oscillator and analog blocks for the time during which they are required.

101
格林帕克的传播延迟时间是多少?

这大大取决于设计因素:使用的块,进行了多少连接,VDD,工作温度等。有关更多详细信息,请参阅数据表中的“时序估算器”部分。

102
电源上电源时的引脚状态是什么?

所有引脚均在电源上和电源序列时处于高阻抗状态。

103
零件如何在启动时配置自己?

GreenPak在启动过程中将来自NVM的数据加载到SRAM寄存器,这配置了所有块和连接。

104
What type of NVM memory is onboard?

The NVM is one time programmable (OTP) memory using the OTP Fuse from TSMC's 0.18 μm 1.8 V / 5 V Logic process. Programming is done via hot electron injection generated by avalanche impact ionization in the bit cell.

105
如果部分是OTP,DEV板如何模拟设计?

The chip has NVM memory that is used for storing data when it is turned off and is one-time programmable. After powering up the data is being copied to the register (buffer), from where it is used to configure the chip. In the emulation mode the NVM is not used, chip configuration is being directly written to the buffer. So, even the chip is one-time programmable, using of emulation mode practically does not have restrictions.

106
我可以在我的电路板上焊接空白零件,然后编程nvm吗?

在物理上这是可能的,但是编程零件需要施加高电压(7.5 V),以及特定的信号序列和针对引脚时钟。对话框不建议执行此操作。

107
每次零件向上读取NVM,所以NVM可以在其寿命中可靠地执行多少读周期?

作为持续可靠性监视器的一部分,作为设备资格的一部分和季度进行NVM测试。该测试按照JESD22-A103条件B,1000小时@ + 150°C进行。到目前为止,1,815,000个设备数量没有失败。假设使用温度为+ 25°C和90%的置信区间,每1,000,000,000个设备时,每隔1,000,000,000个设备将小于1个失效。

108
关于NVM可靠性和寿命的环境影响(温度,辐射等)有什么样的数据?

如上所述研究了温度效果。没有进行MIL-STD_883 M1032辐射测试。

109
GreenPak SLG46400 Rev A和Rev B Silicon之间有什么区别?

对话框继续提高产品的一部分亚博电竞菠菜s philosophy. Based on customer feedback and the tremendous success of the product family, Dialog has added another GreenPAK2 version called Rev B with improved performance to the internal oscillator and analog blocks.

118.
GreenPak零件的出口控制分类号(ECCN)是什么?

GreenPak产亚博电竞菠菜品仅用于商业/消费者应用,并非在商业控制清单上,因此被指定为EAR99。

119.
What are the HTS codes for GreenPAK parts?
  • ICS - 8542.39.0000
  • 董事会 - 8452.31.0000
120.
如何在IC包上读取标记?

请检查产品数据表是否包含包顶部标记系统定义。