SLG46585

9-GPIO，4 ACMP，I2C，16 LUT（最大值），5 CNT / DLY（MAX。），9 DFF / LATCH（MAX。），4 LDO调节器和其他宏小区

The SLG46585 is a small, low power component commonly used to integrate mixed-signal functions under control of an asynchronous state machine. The user creates the circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macrocells of the SLG46585. This highly versatile device allows a wide variety of functions and control logic to be designed within a very small, low power monolithic integrated circuit. The macrocells in the device include the following

四个模拟比较器（ACMP）;

Voltage Reference (Vref) for ACMPs;

模拟温度传感器;

十五个组合功能宏小区：

• 三个可选择的DFF /闩锁或2位LUT;
• Six Selectable DFF/Latch or 3-bit LUTs;
• 一个可选管延迟或纹波计数器或3位LUT;
• Five 8-bit delays/counters or 3-bit LUTs;

Combinatorial Logic:

• 有两个输出的一个4位LUT;

Asynchronous State Machine:

• Eight States;
• Flexible input logic from state transitions;

实时时钟（RTC）二元计数器;

Four Tri-Mode 150 mA LDO Regulators:

• 高功率模式（HP模式）：150 mA输出;
• 低功耗模式（LP模式）：100μA输出;
• Bypass Mode: Acts like a load switch;

1A同步DC / DC步骤转换器;

Serial Communications:

• 对话’s Proprietary 2-Wire interface “PC2W”;
• I2C从协议界面;

边缘检测器输出的可编程延迟;

其他逻辑功能：

• 带边缘探测器的2个DELIGLITCH过滤器;

两个振荡器（OSC）：

• Configurable 25 kHz/2 MHz;
• 2 kHz Low Power Oscillator;

Eight Byte RAM + OTP User Memory:

• RAM Memory space that is readable and writable via I2C;
• User defined initial values transferred from OTP;

POR。

可编程异步状态机

逻辑和混合信号电路

高度通用的宏小胶质

读取保护（读锁）

四个150 mA LDO调节器

I2C接口

2.5 V（±8％）至5 V（±10％）供应

工作温度范围：-40°C至85°C

RoHS兼容/无卤素

SLG46585m: MSTQFN-29 (3.0 x 3.0 x 0.55 mm, 0.4 mm pitch)

产品ID后缀表示包装样式。