7 months ago
Download a configuration file
Posted bypchignon50 points 1 replyHi,
Currently, i use a STM32F4 to pilot the DA14531, the DA14531 is working on advertising to send informations to a smartphone or another embedded board.
Everithing is ok, but i need to download from the smartphone a small configuration file (1k) to the DA14531 and after between the DA14531 to my STM32F4 via serial port.
Between the SMT32F4 and DA14531, no problem, i have already a lot of dialog, but between the DA14531 and smartphone, i have some dialog with the gatt profile , but i can send only 20 bytes, what's the best solution to send a file (1k or 2k bytes) ?
I don't find any profile to do it ?
If somebody have a sample, it'll be great.
Regards,
Pascal
7 months ago
Hi pchignon,
Thanks for your question online and for your interest in our DA14531 BLE solution. I would suggest to take a look at the Dialog Serial Port Service (DSPS).
The DSPS emulates a serial cable communication. It provides a simple substitute for RS-232 connections, including the familiar software flow control logic via Bluetooth low energy. The SPS software distribution includes the application and profile source codes and supports GAP Central/Peripheral roles.
//www.xmece.com/products/dialog-serial-port-service-dsps
For transferring a file from your mobile phone to the DA14531, you could use theDialog DSPS - Source Code - Androidapplication. There is a version for iOS too -Dialog DSPS - Source Code - iOS. Both source codes are available in case you need to develop you own application.
Thanks, PM_Dialog