⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
4 posts / 0 new
Last post
Thu, 2019-09-12 22:29
#1
纳兹
Offline
Last seen:1 year 5 months ago
加入:2019-08-13 16:58
External interrupts in DA1469x ?

Is there a way to provide external interrupts to the DA1469x SoCs? The GPIOs do not have trigger interrupt functionality, so what perpheral can be used to detect rising/falling edges and issue interrupts to the M33?

Keywords:
DA1469x
interrupts
Device:
DA1469x
Fri, 2019-09-13 16:57
PM_Dialog
Offline
Last seen:9 hours 2 min ago
工作人员
加入:2018-02-08 11:03
Hi Naz,

Hi Naz,

Regarding the external interruption, I’d suggest you to take a look atDA1469x Tutorial External Interruptiontutorial from our support website.

Thanks, PM_Dialog

Mon, 2020-11-23 07:20
Zinal
Offline
Last seen:3 weeks 5 days ago
加入:2020-09-23 08:58
Hello,

Hello,

i have configured interrupt for motion detection of accelerometer on GPIO Port 0 , Pin 12 but i'm not able to get interrupt for it. i followed up this same example for external inetrrupt generation . can you help me out for it ?? what is missing ?

Thanks,

Zinal

结婚,2020-12-0215:14
PM_Dialog
Offline
Last seen:9 hours 2 min ago
工作人员
加入:2018-02-08 11:03
Hi Zinal,

Hi Zinal,

Thanks for your comment here.

I’ve replied you in the following forum thread :

https://support.dialog-semiconductor.com/forums/post/dialog-smartbond-bluetooth-low-energy-%E2%80%93-software/da1469x-external-interrupt-not-invoking

Thanks, PM_Dialog