⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
3 posts / 0 new
Last post
Wed, 2020-04-15 17:07
#1
mon2
Offline
Last seen:4 months 2 days ago
Joined:2018-09-04 19:16
Codeless firmware for DA14531 Module / Kits

Hello. Thanks for the recent release of the DA14531 Preview Module kits.

We received our 2 new module based kits yesterday and wish to test out the CODELESS support on this module. So far unable to locate the CODELESS SDK referenced in the documentation.

http://lpccs-docs.dialog-semiconductor.com/UM-140-DA145x-CodeLess/howToUse.html

webpage notes we should reflash the module with one of the following firmwares (BTW - the online blinky worked fine to flash the local LED @ D5):

  1. CodeLess for DA14531 datapump (codeless_531_datapump.hex)
  2. CodeLess for DA14531 standalone (codeless_531_standalone.hex)
  3. CodeLess for DA14531 standalone SET TWO (codeless_531_standalone_set_two.hex

The downloaded DA14585_DA14531_CODELESS_v_6.380.9.10 does not offer the above pre-compiled .hex files.

Do we need to compile them with the Keil compiler or they can be downloaded from Dialog?

The same download does offer fw_1.hex and fw_2.hex files - are they related to the above?

Will keep searching - most likely have too many open webpages and missing the obvious.

Also, when are the modules (only) expected to be available in distribution? Did not see them on Digikey / Avnet.

Thanks.

Keywords:
codeless module
Device:
DA14531 SmartBond TINY Module
Thu, 2020-04-16 17:44
mon2
Offline
Last seen:4 months 2 days ago
Joined:2018-09-04 19:16
The pre-compiled (CODELESS)

The pre-compiled (CODELESS) .hex files do appear to be missing from the downloaded SDK for the DA14531 / 585 use. Need the Keil compiler to compile from source.

Was unable to build the 586 firmware but not required for our project -Update: Dialog noted this firmware will not build at this time.

Attaching the compiled firmware here for others to use.Update: Reposted with the current CMSIS service pack update.

Not sure at this time on how to build the 3rd version of the CODELESS firmware (codeless_531_standalone_set_two。hex).

Welcome the feedback on how to build thecodeless_531_standalone_set_two。十六进制的固件.

List of pre-compiled binaries provided with the SDK are:

  1. CodeLess for DA14585 (codeless_585.hex)
  2. CodeLess for DA14531 datapump (codeless_531_datapump.hex)
  3. CodeLess for DA14531 standalone (codeless_531_standalone.hex)
  4. CodeLess for DA14531 standalone SET TWO (codeless_531_standalone_set_two.hex)
Attachment:
Package iconcodeless_531_585_update_w_CMSIS_updated.zip
Thu, 2020-04-16 17:45
PM_Dialog
Offline
Last seen:10 hours 59 min ago
Staff
Joined:2018-02-08 11:03
Hi mom2,

Hi mom2,

Thanks for your question online and glad that you are using the TINY Module.

We are correct - the binaries are not provided, so you should use the Keil IDE and compile the project. In the meanwhile thanks for the attachments. The Keil project is under DA14585_DA14531_CODELESS\v_6.380.9.10\projects\target_apps\codeless\codeless_5xx\Keil_5 path.

Your feedback would be more than welcome!

>>Also, when are the modules (only) expected to be available in distribution? Did not see them on Digikey / Avnet.

I’ll ask internally and get back to you.

Thanks, PM_Dialog