Skip to main content

High Voltage GreenPAKs

SLG47105

hvpak_slg47105_block_diagram_ds_r001.svg

HV PAK™ Programmable Mixed-signal Matrix with Four Outputs with Operating Voltage up to 13.2V and up to 2A Current per Output

SLG47105将混合信号逻辑和高压H桥式功能组合在微小的2×3mm QFN封装中。一个时间可编程(OTP)非易失性存储器(NVM)以内部逻辑,I / O引脚和宏小区的互连形式存储用户定义的解决方案。
Integrated dual H-Bridge/quad Half-Bridge functionality allows driving different loads up to 2A per output with up to 13.2V voltage. The SLG47105 advanced PWM macrocells provide the ability to drive multiple motors with different PWM frequencies and duty cycles. Low idle current consumption in combination with a compact size further extends the field of possible applications.
这种高度通用的德vice allows a wide variety of mixed-signal functions to be designed alongside with high-voltage capabilities within a tiny and thermally efficient IC.

Lifecycle status

Active

Macrocells Overview

Four High Voltage, Current Drive GPOs with low RDS_ON

Two 8-bit PWM Macrocells with build-in 16-byte register file

Two Oscilllators:

  • 2.048 kHz oscillator
  • 25 MHz oscillator

Two High Speed General Purpose Rail-to-Rail Analog Comparators with Integrated Voltage Reference

Differential Amplifier with Integrator and Analog Comparator

Two Current Sense Comparators with Integrated Voltage Reference

Twelve Combination Function Macrocells:

  • Three Selectable DFF/Latch or 2-bit LUTs;
  • 一个可选择的可编程模式Generator or 2-bit LUT;
  • Six Selectable DFF/Latch or 3-bit LUTs;
  • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
  • One Selectable DFF/Latch or 4-bit LUT

I2C Serial Communication Macrocell

Temperature Sensor

Filter with Edge Detector

Programmable Delay with Edge Detector

Power On Reset (POR)

Features

Up to 13.2V High Voltage and up to 2A High Current Drive GPOs

全H桥和独立半桥控制。

灵活的8位PWMS宏小区

Constant Current Regulation

Constant Voltage Regulation

Two Wide Range Power Supply Inputs:

  • 2.5 V (±8 %) to 5.0 V (±10 %) VDD
  • 3.3 V (±10 %) to 12.0 V (±10 %) VDD2

Built-in Protections:

  • Undervoltage Lockout
  • Overcurrent Protection
  • Thermal Shutdown

I2C control

Operating Temperature Range: -40 °C to 85 °C

One Time Programmable Non-Volatile Memory

Low current consumption (nA level)

RoHS Compliant/Halogen-Free

亚博国际官网平台网址

Smart Locks and Valves

ATMs and POS Printers

MOSFET Drivers

Cameras (Video Security, DSLRs)

Toys

Robotics

Personal Computers and Servers

Office Equipment

Personal and Medical Care Devices

Other Consumer Electronics

Packages and Ordering

SLG47105V: STQFN-20: (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives 注册新闻通讯
GreenPAK Designer
Name 日期 Version
GreenPAK Designer software for Windows, macOS or Linux(7.58 KB)
数据表
Name 日期 Version
SLG47105 Datasheet(4.33 MB) 12/04/2021 3.1
Errata
Name 日期 Version
SLG47105 Errata Sheet(516.12 KB)
Application notes
Name 日期 Version
AN-CM-295 Stepper Motor Driver(2.02 MB)
AN-CM-296智能锁电机驱动器,具有电压调节(1.02 MB)
AN-CM-298 Smart Lock Motor Driver with Battery Discharge Compensation(847.78 KB)
AN-CM-301 LED Lamp Driver(757.67 KB) 24/11/2020 1.0
Brochures
Name 日期 Version
GreenPAK™ Brochure(3.4 MB) 01/01/2020 1.0
User guides and manuals
Name 日期 Version
SLG47105V DIP Proto Board Quick Start Guide(372.75 KB)
UM-GP-001 User Manual SLG47105V Evaluation Board Quick Start(1.71 MB)
UM-GP-003 User Manual SLG47105 Demo Board(1.51 MB) 09/07/2020 1.1
RoHS and Reach
Name 日期 Version
Dialog Environmental Statement for IC Products(868.13 KB)

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives 注册新闻通讯
SLG47105 video placeholder
视频缩略图,点击打开并播放

HV PAK Demo Board Overview

视频缩略图,点击打开并播放

HV PAK Webinar

视频缩略图,点击打开并播放

GreenPAK I2C

视频缩略图,点击打开并播放

GreenPAK SPICE Introduction

视频缩略图,点击打开并播放

GreenPAK Configurable Mixed-signal IC Introduction

视频缩略图,点击打开并播放

GreenPAK Designer Software

视频缩略图,点击打开并播放

GreenPAK Development Platform

视频缩略图,点击打开并播放

选择正确的GreenPak

View the full list of the GreenPAK videos in ourTraining Video Library.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives 注册新闻通讯

This product is available in one package:

SLG47105V: STQFN-20: (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)


Development board selector

GreenPAK Development Board

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.

Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • 使用任何GreenPak设备开发
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
Features:
  • USB interface
  • MacOS,Windows和Linux兼容
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated signal and logic generators
  • LEDs for visual indication
SLG4DVKADV
$59.00
Recommended add-on:
SLG47105V-SKT
$35.00
DIP

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
Suitable for:
  • Programming
  • Emulation
Features:
  • USB interface
  • MacOS,Windows和Linux兼容
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
GreenPAK DIP Development Board
$24.99
Recommended add-on:
SLG47105V-DIP
$1.25
GreenPAK Pro Development Platform

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • 使用Select GreenPak设备开发
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
Features:
  • USB interface
  • MacOS,Windows和Linux兼容
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated high speed signal and logic generators

**This feature is not available at the moment and will be added through the software update

GreenPAK Pro Development Board
$349.99
Recommended add-on:
SLG47105V-SKT
$35.00
GreenPAK Development Board

GreenPAK Advanced Development Board

Provides full programming, emulation and testing functions for GreenPAK devices.
  • Programming
  • Emulation
  • Signal and Logic Generators
SLG4DVKADV
$59.00
Recommended add-on:
SLG46110V-SKT
$35.00
DIP

GreenPAK DIP Development Board

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Programming
  • Emulation
GreenPAK DIP Development Board
$24.99
Recommended add-on:
SLG46110V-DIP
$1.25
GreenPAK Pro Development Platform

GreenPAK Pro Development Board

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • 使用Select GreenPak设备开发
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
GreenPAK Pro Development Board
$349.99

Other components

GPAK 47105

Programmable Mixed-signal Matrix. Two Power Supply Inputs: 2.5 V to 5.0 V and 3.3 V to 12.0 V. 8-GPIO, 4 HV GPO with current up to 2A per Output, 2 PWM, 2 ACMP, 2 CCMP, Integrator, 17 LUTs (max.), 15 DFF/LATCH (max.), 5 CNT/DLY (max.) and other Macrocells. Package STQFN-20 (2.0 x 3.0 mm).

Price table:

Qty 100.-8,999 9,000-49,999 50,000+
Price $0.50 $0.433 接触Dialog
SLG47105V (un-programmed)

Note: All parts will be shipped in tape form.

$0.50
GPAK 47105

Programmable Mixed-signal Matrix. Two Power Supply Inputs: 2.5 V to 5.0 V and 3.3 V to 12.0 V. 8-GPIO, 4 HV GPO with current up to 2A per Output, 2 PWM, 2 ACMP, 2 CCMP, Integrator, 17 LUTs (max.), 15 DFF/LATCH (max.), 5 CNT/DLY (max.) and other Macrocells. Package STQFN-20 (2.0 x 3.0 mm).

Price table:

Qty 3000-8,999 9,000-49,999 50,000+
Price $0.50 $0.43 接触Dialog
SLG47105V (programmed)

Note: All parts will be shipped in tape form.

$0.50
SLG47105-SKT TQFN-20

Included are: SLG4SA20HV-20x30 socket adapter, 50 SLG47105V samples.

SLG47105V-SKT
$35.00
SLG47105V Evaluation Board

Evaluation Board for SLG47105V. Developed for testing designs with all features and high current loads.

SLG47105V Evaluation Board
$18.00
HVPAK SLG47105 Demo Board

HVPAK SLG47105 Demo Board.
Developed for testing designs based on SLG47105 with built-in DCM, Stepper Motor and LED.

SLG47105V-DMO
$50.00
Alternative text

20-pin DIP Proto Board. Perfect for breadboarding and fast prototypes.

SLG47105V-DIP
$1.25

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives 注册新闻通讯
Back to results

1 month ago

SLG47004 Op Amp Buffer

Posted byAndyShort25 points 1 reply
0 upvotes

GreenPAK Designer v.6.25

SLG47004

I am using OPAMP0 as a non-inverting buffer for an analogue input.

It appears that if I allow the input to drop to 0V then the OPAMP output seems to turn off and does not turn on again until 5 or 6mS after the voltage rises. This is at 8MHz B/W. It takes longer to respond with lower B/W settings.

I have not tested this on the actual IC.

Attachment Size
Design print 81.56 KB
OPAMP input drops to 0V 85.26 KB
OPAMP输入保持高于0 v 83.07 KB
接受答案!

1 month ago

ssaravan

Hi,

Thank you for reaching out to us. Unfortunately this is a problem with the simulation model. Our simulation team is working on this and it will be fixed in the next GPAK designer SW revision which will be out by next month

Kind Regards

Shivani