Skip to main content

SLG47004

可配置的混合信号与系统公关矩阵ogrammability and Advanced Analog Features

slg47004

Analog PAK Configurable Mixed-signal IC with Operational Amplifiers, Digital Rheostats, EEPROM and a Wide Set of Analog and Digital Macrocells

SLG47004构建在Gr的灵活性eenPAK’s traditional mixed-signal solution by integrating a mix of advanced analog features including Op Amps with programmable bandwidth, 10-bit digital rheostats, analog switches, and a chopper analog comparator. The unique Auto-Trim feature highlights the ability of this GreenPAK device to periodically tune its rheostat value to either compensate for system error sources or reconfigure circuit parameters. The SLG47004 provides dynamic power down control for all analog and digital blocks to optimize power consumption performance. Common applications include sensor interfaces, ADC analog front-ends, configurable amplifiers, tunable filters, and a variety of other analog circuits. This multi-time programmable solution is built into a tiny 3 mm x 3 mm package.

Lifecycle status

Active

Macrocells Overview

Two General Purpose Op Amps with Configurable Bandwidth

  • Instrumentation Amplifier Mode Including 3rdInternal Op Amp

Two 10-bit 100kΩ Digital Rheostats with Optional Potentiometer Mode

Two SPST Analog Switches

Three Analog Comparators

  • Two Low Power General Purpose Rail-to-Rail Analog Comparators (ACMPxL)
  • One Low Offset Chopper Comparator

Three Oscillators (OSC):

  • 2.048 kHz Oscillator;
  • 2.048 MHz Oscillator;
  • 25 MHz Oscilaltor;

Thirteen Combination Function Macrocells

  • Three Selectable DFF/LATCH or 2-bit LUTs
  • One Selectable Programmable Pattern Generator or 2-bit LUT
  • Seven Selectable DFF/LATCH or 3-bit LUTs
  • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
  • One Selectable DFF/LATCH or 4-bit LUT

Seven Multi-Function Macrocells

  • Six Selectable DFF/LATCH or 3-bit LUTs + 8-bit Delay/Counters
  • One Selectable DFF/LATCH or 4-bit LUT + 16-bit Delay/Counter

I2C Serial Communication Interface

Analog Temperature Sensor

2-kbit (256 x 8) I2C-Compatible (2-Wire) Serial EEPROM Emulation with Software Write Protection

Power On Reset (POR)

Features

User-defined Auto-Trim Procedure for Two Independent Analog Channels

Event-triggered Memory Self-programming Routine for Digital Rheostats

In System Programmability

Multiple Time Programmable Memory

Configurable Power Down Option for All Analog and Digital Macrocells

Wide Range Power Supply

2.5 V (±4%) to 5 V (±10%)

Low Current Consumption

Operating Temperature Range: -40°C to 85°C

RoHS Compliant / Halogen-Free

亚博国际官网平台网址

Pressure Sensor Interfaces

Photodetector Interfaces (Transimpedance Amplifiers, TIA)

FSR (Force Sensitive Resistor) Sensor Interface

PGA (Programmable Gain Amplifiers)

InAmp (Instrumentation Amplifiers)

Sample & Hold Circuits

Portable and Handheld Electronics

Home Appliances and IoT

Robotics

Other Consumer and Industrial Electronics

Packages and Ordering

SLG47004V: STQFN-24 (3.0 x 3.0 x 0.55 mm, 0.4 mm pitch)

The product ID suffix indicates the package style.

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
GreenPAK Designer
Name Date Version
GreenPAK Designer software for Windows, macOS or Linux(7.58 KB)
Datasheets
Name Date Version
SLG47004 Datasheet(12.99 MB) 10/03/2021 2.4
Errata
Name Date Version
SLG47004 Errata(309.19 KB) 12/02/2021 1.1
Application notes
Name Date Version
AN-CM-307 Analog Front End for Heart Rate Monitor(967.14 KB) 03/11/2020 1.0
AN-CM-308 Analog Front End for a Pressure Sensor(1.21 MB) 03/11/2020 1.0
AN-CM-309 Tracking ADC(696.26 KB) 03/11/2020 1.0
AN-CM-310 Adjustable Analog Filter(631.76 KB) 18/11/2020 1.0
AN-CM-311 Low-Power Button Replacement with Force-Sensitive Resistor(1019.53 KB) 01/01/2021 1.0
PCB libraries
Name Date Version
GreenPAK Altium Library(2.68 MB) 06/11/2020 3.0
GreenPAK Eagle Library(25.65 KB) 06/11/2020 012
GreenPAK OrCAD Library(319.31 KB) 06/11/2020 17.2
User guides and manuals
Name Date Version
GSD Quick Start Guide(181.06 KB) 23/10/2020 1.0
SLG47004 In-System Programming Guide(606.42 KB) 09/11/2020 1.0
SLG47004V DIP Proto Board Quick Start Guide(721.39 KB)
SLG4DVKGSD: GreenPAK ISP Board Quick Start Guide(591.05 KB) 26/10/2020 1.0
UM-GP-005 User Manual Advanced Analog GreenPAK Evaluation Board(1.28 MB) 28/10/2020 1.0
RoHS and Reach
Name Date Version
Dialog Environmental Statement for IC Products(868.13 KB)
Webinars
Name Date Version
5 Configurable Mixed-Signal Webinar Presentation(1.87 MB) (Registered users only)
Video thumbnail, click to open and play

Analog GreenPAK™ Webinar

Video thumbnail, click to open and play

5 Configurable Mixed-Signal Webinar

Video thumbnail, click to open and play

GreenPAK Configurable Mixed-signal IC Introduction

Video thumbnail, click to open and play

GreenPAK Designer Software

Video thumbnail, click to open and play

GreenPAK Development Platform

Video thumbnail, click to open and play

Choosing the Right GreenPAK

View the full list of the GreenPAK videos in ourTraining Video Library.

This product is available in one package:

SLG47004V: STQFN-24 (3.0 x 3.0 x 0.55 mm, 0.4 mm pitch)


Development board selector

GreenPAK Development Board

Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.

Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using any GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated signal and logic generators
  • LEDs for visual indication
SLG4DVKADV
$59.00
Recommended add-ons:
SLG47004V-SKT
$35.00
SLG47004V Evaluation Board
$18.00
DIP

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
Suitable for:
  • Programming
  • Emulation
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
GreenPAK DIP Development Board
$24.99
Recommended add-on:
SLG47004V-DIP
$1.25
GreenPAK Pro Development Platform

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using select GreenPAK device
Suitable for:
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
Features:
  • USB interface
  • MacOS, Windows and Linux compatible
  • Programming and Emulation
  • Gated expansion header for connection to external test equipment
  • Integrated high speed signal and logic generators

**This feature is not available at the moment and will be added through the software update

GreenPAK Pro Development Board
$349.99
GreenPAK Development Board

GreenPAK Advanced Development Board

Provides full programming, emulation and testing functions for GreenPAK devices.
  • Programming
  • Emulation
  • Signal and Logic Generators
SLG4DVKADV
$59.00
Recommended add-on:
SLG46811V-SKT
$35.00
DIP

GreenPAK DIP Development Board

Perfect for breadboarding and fast prototypes.

Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Programming
  • Emulation
GreenPAK DIP Development Board
$24.99
Recommended add-on:
SLG46811V-DIP
$1.25
GreenPAK Pro Development Platform

GreenPAK Pro Development Board

Provides advanced emulation and testing functions for select GreenPAK devices.

Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:

  • Program custom samples in minutes
  • Test GreenPAK projects in-circuit
  • Develop using select GreenPAK device
  • Programming
  • Emulation
  • Signal and Logic Generators
  • High Speed Signal and Logic Generators
  • Logic Analyzer**
GreenPAK Pro Development Board
$349.99
SLG4DVKISP

GreenPAK Development Board for Serial Debugging and In-System Programmability.

  • Can support serial debugging for all GreenPAK parts with I²C
  • Serial programming for SLG46824, SLG46826, and SLG47004
  • Very helpful in late stages of development when doing debug on-board is easiest
SLG4DVKGSD
$28.75

Other components

SLG47004

GreenPAKTMProgrammable Mixed-signal Matrix with In System Programmability. 2 Op Amps (In Amp mode including internal Op Amp), 2 100k 10-bit digital rheostats, 8 GPIO, 3 ACMPs, 2 SPST analog switches, 20 LUTs (max.), 7 CNT/DLY (max.), 18 DFF/LATCH (max.), EEPROM, I2C, and other Macrocells. Package: STQFN-24.

SLG47004V (un-programmed)
$0.50
SLG47004

GreenPAKTMProgrammable Mixed-signal Matrix with In System Programmability. 2 Op Amps (In Amp mode including internal Op Amp), 2 100k 10-bit digital rheostats, 8 GPIO, 3 ACMPs, 2 SPST analog switches, 20 LUTs (max.), 7 CNT/DLY (max.), 18 DFF/LATCH (max.), EEPROM, I2C, and other Macrocells. Package: STQFN-24.

SLG47004V (programmed)
$0.60
SLG47004V-SKT

Included: SLG4SA24AA-30x30 socket adapter, 20 SLG47004V samples.

SLG47004V-SKT
$35.00
SLG47004V-DIP

20-pin DIP Proto Board. Perfect for breadboarding and fast prototypes.

SLG47004V-DIP
$1.25
SLG47004V Evaluation Board

Evaluation Board for SLG47004. Designed to prototype basic analog configurations of SLG47004 with user-defined parameters.

SLG47004V Evaluation Board
$18.00
SLG4DVKISP

GreenPAK Development Board for Serial Debugging and In-System Programmability.

  • Can support serial debugging for all GreenPAK parts with I²C
  • Serial programming for SLG46824, SLG46826, and SLG47004
  • Very helpful in late stages of development when doing debug on-board is easiest
SLG4DVKGSD
$28.75
Back to results

1 month ago

SLG47004 Op Amp Buffer

Posted byAndyShort25 points 1 reply
0 upvotes

GreenPAK Designer v.6.25

SLG47004

I am using OPAMP0 as a non-inverting buffer for an analogue input.

It appears that if I allow the input to drop to 0V then the OPAMP output seems to turn off and does not turn on again until 5 or 6mS after the voltage rises. This is at 8MHz B/W. It takes longer to respond with lower B/W settings.

I have not tested this on the actual IC.

Attachment Size
Design print 81.56 KB
OPAMP input drops to 0V 85.26 KB
OPAMP input kept above 0V 83.07 KB
accepted answer!

1 month ago

ssaravan

Hi,

Thank you for reaching out to us. Unfortunately this is a problem with the simulation model. Our simulation team is working on this and it will be fixed in the next GPAK designer SW revision which will be out by next month

Kind Regards

Shivani